RSS Feed
Knowledgebase : Barrel Fans
Unsure of your fan's age? There are 2 key changes that occurred to our 42 inch barrel fans to help you spot the difference. Fans manufactured _BEFORE_ April 2005 had: * the motor mounted to the side of the mounting struts * a fan blade assembly wi...
When replacing or inspecting the fan blade on a barrel fan, the hub on the fan blade is oriented away from the motor. Make sure that when you are placing the fan blade on the motor shaft, that the blade clears all objects in the fan (namely screws on the ...
ISSUE POTENTIAL ISSUE AND CORRECTIVE ACTION My fan is not operating at all. * No power - Inspect Power Cord for damage. Be sure unit is plugged in and turned on. * Faulty Switch - Unplug unit, bypass switch and wire motor directly then plug...
To remove the wheel, pry the cap from the end of the axle rod. Be careful to not bend the cap as it will be very hard to put back on. To mount the cap, place over the axle and tap with a rubber hammer to secure.
Need to rewire the switch to your motor? See the attachment below for a wiring diagram for all barrel fans using 2-speed switches.
Wattage is amperage multiplied by voltage. Take the listed amperage from the motor info and multiply by 120 volts to find wattage. keywords - watt, wattage, watts
MOTORS MOTOR NO. REPLACEMENT PART DESCRIPTION                                                        REPLACEMENT MOTOR NO. BRE 420 2-speed direct drive PSC Motor for BF24TF series XE420 BRE 421 2-speed direct drive PSC Motor for BF30DD series XE421 ...
All motors have 1/2 inch shafts. All bearing assemblies have 5/8ths inch shafts. The 6 inch pulley has a 5/8ths inch diameter opening. The 2-3 inch pullies have 1/2 inch openings.
_Please be aware that warranty instructions are subject to change - for the most up to date information, please contact us toll-free or visit our Warranty page at https://bvc.com/warranty/ [https://bvc.com/warranty/]_ YOUR WARRANTY CLAIM CAN BE COMPLETE...